| hybridgroup/gobot |
8,607 |
|
20 |
31 |
about 2 years ago |
32 |
October 30, 2023 |
119 |
other |
Go |
| Golang framework for robotics, drones, and the Internet of Things (IoT) |
| kidoman/embd |
1,210 |
|
16 |
13 |
over 7 years ago |
5 |
May 08, 2017 |
46 |
mit |
Go |
| Embedded Programming Framework in Go |
| loklak/loklak_IBM_Home_Automation |
1,019 |
|
0 |
0 |
over 9 years ago |
0 |
|
0 |
|
Python |
| IOT update integration for Loklak to be able to receive GENERIC data from IBM Home Automation ibmiotf |
| tinygo-org/drivers |
554 |
|
0 |
44 |
about 2 years ago |
56 |
September 21, 2023 |
115 |
bsd-3-clause |
Go |
| TinyGo drivers for sensors, displays, and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces. |
| timofurrer/w1thermsensor |
485 |
|
29 |
2 |
over 2 years ago |
26 |
September 27, 2023 |
8 |
mit |
Python |
| A Python package and CLI tool to work with w1 temperature sensors like DS1822, DS18S20 & DS18B20 on the Raspberry Pi, Beagle Bone and other devices. |
| vitormhenrique/OctoPrint-Enclosure |
351 |
|
0 |
0 |
about 4 years ago |
0 |
|
146 |
gpl-3.0 |
Python |
| OctoPrint Enclosure Plugin |
| momenso/node-dht-sensor |
300 |
|
104 |
38 |
over 3 years ago |
39 |
July 19, 2020 |
8 |
lgpl-3.0 |
C |
| Node.js Humidity and Temperature sensor addon |
| BluesYu/MarStech_Vision_Sensor |
150 |
|
0 |
0 |
over 5 years ago |
0 |
|
1 |
apache-2.0 |
C++ |
| MarStech vision sensor is a low cost sensor for STEM Education |
| rkoshak/sensorReporter |
100 |
|
0 |
0 |
over 2 years ago |
0 |
|
4 |
apache-2.0 |
Python |
| A python based service that receives sensor inputs and publishes them over REST (should work with any API but mainly tested with openHAB) or MQTT. It can also receive commands and perform an action (e.g. set a GPIO pin to HIGH). It currently supports Bluetooth, GPIO on Raspberry Pi, Amazon Dash buttons, command line scripts, and Roku IP address discovery. |
| klappy/gpio |
94 |
|
11 |
1 |
over 11 years ago |
6 |
June 09, 2012 |
3 |
|
Ruby |
| gpio ruby gem allows for ruby code running on devices such as raspberry pi or systems with 1wire usb adapters to speak to the system's input/output pins. the end goal is for people to contribute code for specific devices, sensors and outputs. |
