| xoseperez/espurna |
2,942 |
|
0 |
0 |
about 2 years ago |
0 |
|
319 |
gpl-3.0 |
C++ |
| Home automation firmware for ESP8266-based devices |
| ironsheep/RPi-Reporter-MQTT2HA-Daemon |
370 |
|
0 |
0 |
over 2 years ago |
0 |
|
39 |
gpl-3.0 |
Python |
| Linux service to collect and transfer Raspberry Pi data via MQTT to Home Assistant (for RPi Monitoring) |
| KmanOz/Sonoff-HomeAssistant |
347 |
|
0 |
0 |
over 7 years ago |
0 |
|
13 |
mit |
Arduino |
| Firmware for ESP8266 based itead Sonoff switches for use with HomeAssistant |
| bruhautomation/ESP-MQTT-JSON-Multisensor |
304 |
|
0 |
0 |
almost 7 years ago |
0 |
|
39 |
apache-2.0 |
C++ |
| (OBSOLETE) ESP MQTT JSON Multisensor for Home Assistant. Supported sensors include the TEMT6000 light, AM312 PIR, DHT22 temperature/humidity sensors. RGB led supports flash, fade, and transition. Over-The-Air (OTA) uploading, too! |
| KmanOz/KmanSonoff |
273 |
|
0 |
0 |
about 8 years ago |
0 |
|
21 |
mit |
C++ |
| Firmware for ESP8266 based itead Sonoff switches for use with HomeAssistant / mqtt |
| Nilhcem/home-monitoring-grafana |
189 |
|
0 |
0 |
over 5 years ago |
0 |
|
4 |
|
Python |
| Home sensor data monitoring with MQTT, InfluxDB and Grafana |
| aquaticus/nexus433 |
178 |
|
0 |
0 |
over 2 years ago |
0 |
|
1 |
gpl-3.0 |
C++ |
| 433MHz temperature and humidity sensor receiver that integrates with home automation systems. |
| mcer12/Temper-ESP8266 |
153 |
|
0 |
0 |
about 5 years ago |
0 |
|
0 |
gpl-3.0 |
C++ |
| Temper is a compact temperature sensor based on ESP8266 and SHT30 with large 13x7 pixel led display. |
| softypit/esp32_mqtt_eq3 |
119 |
|
0 |
0 |
about 4 years ago |
0 |
|
27 |
|
C |
| esp32-based mqtt node to control EQ-3 BLE TRVs |
| MayaPosch/BMaC |
102 |
|
0 |
0 |
about 3 years ago |
0 |
|
0 |
|
C++ |
| Building Management and Control system |
