| kubermesh/kubermesh |
461 |
|
0 |
0 |
about 6 years ago |
0 |
|
4 |
apache-2.0 |
Shell |
| Bare metal, self-hosted, self-healing/provisioning, mesh network kubernetes cluster |
| ttn-zh/ic880a-gateway |
376 |
|
0 |
0 |
almost 7 years ago |
0 |
|
7 |
gpl-3.0 |
Shell |
| Reference setup for iC880a gateways running The Things Network |
| vortex314/serial2mqtt |
111 |
|
0 |
0 |
over 2 years ago |
0 |
|
3 |
mit |
C++ |
| Implement a Linux gateway that reads serial port ( USB, serial , bluetooth) commands and transfers to MQTT host. MQTT without ethernet or Wifi on a low cost micocontroller. Don't develop a serial command interface , just use MQTT UI's and features. |
| pajikos/sms-gammu-gateway |
104 |
|
0 |
0 |
about 2 years ago |
0 |
|
16 |
apache-2.0 |
Python |
| Simple SMS REST API gateway for sending SMS from gammu supported devices |
| mswhirl/autoflashgui |
59 |
|
0 |
0 |
almost 3 years ago |
0 |
|
10 |
gpl-3.0 |
Python |
| Utility to flash firmware to modems and run setup commands after the flash has completed |
| WebThingsIO/zigbee-adapter |
44 |
|
0 |
0 |
over 3 years ago |
0 |
|
77 |
mpl-2.0 |
JavaScript |
| Zigbee adapter add-on for WebThings Gateway |
| karloygard/xcomfortd-go |
41 |
|
0 |
0 |
about 2 years ago |
0 |
|
19 |
bsd-3-clause |
Go |
| Eaton xComfort CKOZ-00/14 and CCIA-0x/01 to MQTT gateway |
| ataradov/dgw |
33 |
|
0 |
0 |
over 5 years ago |
0 |
|
4 |
|
C |
| USB HID Data Gateway |
| moio/raspberry-openvpn-gateway |
30 |
|
0 |
0 |
over 7 years ago |
0 |
|
1 |
bsd-3-clause |
SaltStack |
| A Raspberry Pi-based OpenVPN sharing gateway |
| HarringayMakerSpace/HabitatLoraGateway |
20 |
|
0 |
0 |
about 8 years ago |
0 |
|
2 |
|
Arduino |
| An ESP8266 based Gateway for sending LORA transmissions to the Habitat high altitude balloon tracking system. |
