| blinker-iot/blinker-library |
2,829 |
|
0 |
0 |
over 2 years ago |
0 |
|
4 |
mit |
C++ |
| An IoT Solution,Blinker library for embedded hardware. Works with Arduino, ESP8266, ESP32. |
| ZerBea/hcxdumptool |
1,644 |
|
0 |
0 |
about 2 years ago |
0 |
|
0 |
mit |
C |
| Small tool to capture packets from wlan devices. |
| marcoschwartz/aREST |
1,148 |
|
0 |
0 |
almost 4 years ago |
0 |
|
96 |
other |
C++ |
| A RESTful environment for Arduino |
| hansjny/Natural-Nerd |
565 |
|
0 |
0 |
about 3 years ago |
0 |
|
4 |
|
CSS |
| mtongnz/ESP8266_ArtNetNode_v2 |
333 |
|
0 |
0 |
about 6 years ago |
0 |
|
70 |
gpl-3.0 |
C++ |
| ESP8266 based WiFi ArtNet to DMX, RDM and LED Pixels |
| emard/ulx3s |
323 |
|
0 |
0 |
over 2 years ago |
0 |
|
4 |
other |
OpenSCAD |
| PCB for ULX3S FPGA R&D board |
| bruhautomation/ESP-MQTT-JSON-Multisensor |
304 |
|
0 |
0 |
almost 7 years ago |
0 |
|
39 |
apache-2.0 |
C++ |
| (OBSOLETE) ESP MQTT JSON Multisensor for Home Assistant. Supported sensors include the TEMT6000 light, AM312 PIR, DHT22 temperature/humidity sensors. RGB led supports flash, fade, and transition. Over-The-Air (OTA) uploading, too! |
| BlueAndi/esp-rgb-led-matrix |
253 |
|
0 |
0 |
over 2 years ago |
0 |
|
9 |
mit |
C++ |
| Full RGB LED matrix, based on an ESP32 and WS2812B LEDs. |
| stelgenhof/AiLight |
251 |
|
0 |
0 |
over 4 years ago |
0 |
|
0 |
mit |
C |
| AiLight is a custom firmware for the esp8266 based Ai-Thinker (or equivalent) RGBW WiFi light bulbs |
| diyhue/Lights |
163 |
|
0 |
0 |
over 2 years ago |
0 |
|
5 |
|
C++ |
| DIY lights with support for diyHue |
