| hathach/tinyusb |
4,324 |
|
0 |
0 |
about 2 years ago |
0 |
|
232 |
mit |
C |
| An open source cross-platform USB stack for embedded system |
| adafruit/Adafruit_TinyUSB_Arduino |
399 |
|
0 |
0 |
about 2 years ago |
0 |
|
12 |
mit |
C |
| Arduino library for TinyUSB |
| changeofpace/MouClassInputInjection |
161 |
|
0 |
0 |
almost 6 years ago |
0 |
|
3 |
mit |
C++ |
| MouClassInputInjection implements a kernel interface for injecting mouse input data packets into the input data stream of HID USB mouse devices. |
| signal11/m-stack |
144 |
|
0 |
0 |
about 6 years ago |
0 |
|
24 |
other |
C |
| Free USB Stack for PIC 16F, 18F, 24F, and 32MX Microcontrollers |
| kevinmehall/usb |
64 |
|
0 |
0 |
about 9 years ago |
0 |
|
5 |
mit |
C |
| Minimalist portable USB device stack for SAMD21, LPC1800, LPC4300, Xmega |
| nwertzberger/OpenPLC |
52 |
|
0 |
0 |
over 7 years ago |
0 |
|
0 |
|
HTML |
| OpenPLC is an open source PLC Hardware board. Think Arduino, but change the language used, up the voltage levels, and add a built-in Ethernet port. |
| microsoft/NCM-Driver-for-Windows |
40 |
|
0 |
0 |
almost 3 years ago |
0 |
|
2 |
mit |
C++ |
| The Windows NCM drivers (host-side and function-side) are the NetAdapterCx based NIC drivers that implements Network Control Model (CDC NCM) specification defined by USB-IF |
| MicrochipTech/usb-pd-software-framework |
21 |
|
0 |
0 |
over 3 years ago |
0 |
|
0 |
other |
C |
| Microchip's Lightweight USB Power Delivery Software Stack |
| OpenWinCon/pi-switch |
20 |
|
0 |
0 |
about 10 years ago |
0 |
|
1 |
|
|
| RaspberryPi based Wired/Wireless switch for ONOS based SDN networking testbed. |
| johnnydrazzi/USB-Stack |
12 |
|
0 |
0 |
over 2 years ago |
0 |
|
0 |
gpl-3.0 |
C |
| Device USB Stack for PIC16 & PIC18 |
